As found in the sellers garage.
You can see this is not the QA setup, it was for the x55 series.
Even included the manual!
The FEL plow I built, it was a Meyers Poly Plow cut down to 60"
I made it semi-QA...but it still is heavy!
Hangs from the rear in the MMM support brackets.
Plenty of clearance when raised.
Three of the four major pieces.
Crossover relief valve.
Crossover relief valve mounted to the subframe.
Crossover relief valve plumbed.
The mounts for the shoes where fixed to keep the shoes 90* to the ground.
1x6" Urethane cutting edge.
Removing steel edge.
Milling 3/4" x 2" slots.
I love this CNC stuff!
Milling slots on the Bridgeport.
Urethane edge sandwiched between the blade and the steel edge.
Check out my John Deere forum at http://www.greentractortalk.com