Conduit from main panel, into the ground and out to the workshop.
Ground rod & 6 gauge wire outside the shed.
Had to switch out the 30amp breaker for a 20 amp breaker since we ran 12 gauge wire. I'll need to switch this to a GFCI breaker eventually since code requires a GFCI breaker for any direct burial wire less than 24" deep (we only went 18").
Apparently the hot wire coming from the main panel has to be pigtailed in a 120v setup, not wired directly to the lugs and then using a bridge wire...so I had to switch it up a bit.
Put plastic conduit over some of the 12/2 wire for protection since the walls aren't going to be drywalled and closed in.
First two shop lights are up. Need to put up four more and add cabinets and more shelving yet.
Wired subpanel. I had to add a ground bar after finding out the ground and neutral wires had to be on isolated bars in a subpanel in a detached structure...and the subpanel only came with the one bar.
Roof decking is up...felt paper down.
Sheathing up on gables, overhang hung on one side.
Uploaded by DROID™