how to make a winshield 1. Slide One: Remove the label from the 2 liter bottle, spray the glue residue with WD-40 after sitting for minute or 2 wipe off with a paper towel.
how to make a winshield 2. Slide Two: Take a black sharpie and mark out the seams that runs down sides of the 2 liter bottle.
how to make a winshield 3. Slide Three: Each bottle will yield 2 windshields - mark one on each side of the bottle.
how to make a winshield 4. Slide Four: cut the top of the bottle off
how to make a winshield 5. Slide Five: cut along the "seam" lines you drew out earlier cut off the bottom of the bottle the bottle should now look like this
how to make a winshield 6. Slide Six: After cutting the windshield out they should now look like these
how to make a winshield 7. Slide Seven: Take 2 push pins and pin the tab to a scrap cardboard - spray paint black - after the paint dries cut off the tab and glue in place.
completed Q-2 notice the windshelid
