Basic front & rear lights driver on pcb's left side / optional brake & exhaust lights µc manager on right side (may be cut/piggy backed ;o)
Ultra lightweight despite gold ;o)
0.4mm thick - reliable AWG30 wire fastening
SuperCap onboard or offboard
First complete kits pictures very soooooonnn...
2.2 gr whole kit (SuperCap weights already 1 gr)
Still too heavy ? ;o)
Reliable wire fastening
Optional brake & exhaust pipe lights µc driver on the road...
The basic light (& light ;o) kit
Complete basic assy. (white front & red rear lights)
Complete unassembled kit w. exhaust & brake option (2 white front - 2 red rear/brake - 1 very small yellow exhaust lights)
Supercap may be mounted on any side of the PCB, so just choose !
w/o front lights complete assy. (2 red rear/brake - 1 yellow exhaust lights)
2nd option PCB piggyback mounted ;o) why not a third one ?
2 more outputs per option PCB, in this case "dancing" front lights in standby mode, this is a prototype !
Complete harness w. animated front lights, rear/brake, & exhaust flame "micro" led
2nd fully independant & prog. µboard
Minus 2x 1.03gr per supercap that means 1.88 gr for pcbs, connector, leds & wires.
