Here are a few measurements of the Chameleon DAC. Used Equipment: Audio Precision P1. The total harmonic distortion of the Chameleon at an ouput voltage of 1.938V = 1.58% As you can see the output voltage is slighty higher than the Valab, where I reached a value of approx. 1.7V
A bit hard to see but the signal to noise ratio is approx. -78.00 dBu
The results of a frequency sweep from 20Hz to 20Khz. As you can see there is a slight emphasis on the top end, starting at 1Khz. But this is nothing to worry about because the difference is very small: approx. 0.1dB at 2Khz to 0.5dB at 20Khz
