Parts For Install.
Fans.
Factory parts still in place.
Factory in place.
More factory parts in place.
Frontal shot factory parts.
Removed clips from radiator.
Removing the factory fan and fan shroud.
Parts not needed anymore.
Radiator with fan and shroud removed.
Top view of removed parts.
Made sure the radiator was clean before the install.
Scot slipping the new shroud/fans back into the truck.
This shows the clearance between the fans and belt tensioner,
This shot shows the clearance between fans/shroud and oil fill tube.
This shot shows the clearance betweeen the assembly and motor front.
Radiator overfill bottle reinstalled.
Another view of radiator bottle.
Picture of wiper washer bottle reinstalled.
Windshiled washer bottle reinstall shot.
This shows the way we hid the wiring to the power and ground for the controller.
A different view of the wiring.
The breaker placed out of sight on the passenger side battery tray.
Another shots of the breaker placement.
Wiring on controller.The red and blue wire run into the cab.Red wire is for the 12v keyed power and the blue is for the external manual over ride switch to be installed later.
A different view of the controller and wiring.
Fans installed and finished.
