Left side fuse- I took this out since it's not stock.
These wires were attached to blue "jumper" wires.
The left fuse was connected here with a white-ish wire with thin black stripe. This wire branched off into this 243 012 connection on the circuit board. This white wire is completely toasted.
This green and yellow wire was connected from the green and BLACK portion of the circuit board to the little silver box on the bottom right side of the headlight bucket.
Left side hole where a fuse was installed- probably for electrics in a Windjammer fairing.
Circuit board in the back of the headlight bucket. Color-coded. The wire colors should correspond to the sections on the circuit board.
Another shot of the toasted wire connected to the non-standard left-side fuse.
The headlight bucket after disconnected all the wires and untangling. Makes a lot more sense when it's not crammed in there.
This brown cable comes out of the headlight and is not attached to the main harness, so damage was pretty limited.
This green and brown wire from the main harness was not connected to anything and was wrapped with electrical tape around the neck of the harness.