Replaced bottom of rudder.
Fuselage on the front rotisserie to allow work at the tailpost.
Bottom longeron spliced.
Both bottom longerons and diagonals.
Splice with rosets.
Small tube under the leading edge of the horizontal stabilizer needs replacing due to some deformation of the tube.
Tail spring bracket L1027-02 needs to be installed. Tail brace wire bracket has been replaced.
Front right gear carry-thru tube is soft and dented when checked. Tube in a tube splice should work well in this area.
Door channels need to be made and installed.
Window channels need to be made and installed.
"X" brace the top deck.
Check the dual control attach fittings IAW Piper drawings 11576 and 11810.
Firewall has patched tubes.
Hole in upper left tube.
Previous patch appears sound.
Diagonal tube had a bow in it but straightened out.
Diagonal tube had a bow in it but straightened out. Might have been heat deformation from welding the fitting on. Will get second opinion before replacing.
Front door post tube replaced.
Sheet metal parts fabricated as neccasary.
Door channels installed and fit.
Left window post tube replaced.
Tail spring pad welded in.
Tail repairs complete.
Completed tail.
Firewall patch.
RH "D" window.
Rear liner tube nut for grease zerk.
LH "D" window.
New panel support tube with tabs per PA17 drawing.
Fuel tank support tube patch.
Doubler on RH rear wing attach fitting.
New axle installed.
Aligning D windows.
