Dimpling the ribs.
The dimpling defenitely took extra time.
I tightened the tie-down nut with a wrench and screwdriver!
Riveting the lower skin.
Lower rear skin done.
Flip the wing over and support on blocks.
Make and attach the AOA support brackets.
Drilling for the support brackets. I used the short drill to squeeze in.
Brackets cleco'd in place.
I ordered 1/2" bushings in bulk from Waytek.
Two for AOA and one for wires.
Brackets all in place.
Cleaning up the backside of the spar holes.
How I cleaned up the spar.
Poly tube conduit for wires.
