old tiger remote
hydraulic brake switch
iva caps for brake fluid added
switches installed
Zetec engine installed
started cutting hole for exhausts
needed shorter oil filter, to clean steering column
the garage is all green, and so am I !!
still a bit more trimming required
collector & silencer fitted
started working out the cooling system
installed the bike carbs
one water hose left to do.
need two more brackets for bottom of radiator
fuel pressure regulator fitted
radiator & fan bracket fitted
tight fit
Fuel filler trial fit
fuel sender fitted
looks like I will need to cut the boot
fuel filler fitted
tank fitted
battery box
battery box fitted
megajolt & edis ecu from Chester Sports Cars
engine turns over, and I've got a spark at the plugs.
all wired up, wires just need clipping under the dash
wires need clipping under dash
got the sierra steering cowling on, just need to trim the dash
showing water temp warning
rad bracket finished and fan attached
alternator trial fitted,belt very tight
dash finished
silencer fitted with chrome tail pipe, probably need some nut covers on the sharp edges.
throttle pedal and cable connected
clutch pedal connected
about 15mm clearance rally design's remote
in reverse
needed to remove the old tiger remote webbing
The Tiger roars
under the cover
trial fit, needs a bit more trimming
rally design remote
i've had to move the brake lines further forward
intatrim odyssey
waiting for the stainless bolts to arrive
Headlight spacer
wiring cable tied under nose
carpet mats, trimmed by http://www.surreycarpetbinding.co.uk/
on the way to MOT
mot passed.
some iva covering
bit of support to the dash
hole where indicators removed
trim on back of head light for iva
new indicators for iva
hole covered with sticker of union flag
side repeaters installed and hole covered with sticker
brake bias valve, reduces pressure to rear brakes
trial fit of windscreen and weather gear
windscreen fitted and new mirrors
