10" Flywheel IDEAL, has original gas tank(has been patched) and both CAST iron Struts for the G. Tank(probably never used on a lawn mower). There are 2(two) flaws; no muffler and there is a small chip in the top cover at about 12 o'clock(see next picture)Excellent compression, and is a very good example of a small Ideal complete. Priced at 1150.00, includes crating & shipping to the nearest Fastenal Store to your location.(8 Pic)
10" IDEAL; NOTE: There is a amall pc. broken out to the left of the bolt, only faul other than no muffler. SN is on a brass tag which is different.
10" Ideal(Orig. Cast Iron Struts)(2)
10" Ideal with Lunkenheimer Carb.
3hp. John Deere, restored 2013, complete & running. Priced at $2300. includes crating. Send time zone for shipping Est. (4 Pic)
1-1/2hp. Maynard, nice Pulley, Trucks, muffler, battery/coil, Oiler, gas tankz& Crank Guard/ This a "Crank & Go small engine, no c/b/w that I can determine, Priced at 1295.00 includes crating & shipping to the Nearest Fastenal Store to you that has a fork lift. (5 Pic) NO Barter or Tears.
1hp. "Tom Thumb", older restore but still in very good conditon. Engine is complete with B/C Gear & Pulley, copy of Orig. Battery box and hand lettered in Gold Leaf. The board has been replaced, the trucks are Original as best I can remember(the wheels are NOT the wide ones) Engine needs nothing, was some slight pitting on the flyhweels and it was chosen to NOT turn them down by machine, Battery and Coil is furnished. Priced at $2500. includes crating and shipping to the nearest Fastenal Store to you that has a forklift (8 Pic)
1hp. Famous, Older restore, but still in very good condition.Pulley, C. Guard cover, Muffler, Battery Box(Battery/Coil furnished), Hopper anti-Splash cover, nice oiler & Repo. Board. Trucks and handle are thought to be original, wheels are the narrow ones.Very nice, solid Engine. Priced at $2500. includes Crating & shipping to the nearest Fastenal Store to you that has a Forklift.(8 Pic)
1-3/4hp. "Sultan" Vertical Engine, #3186, by Whitman Agricultural Company, ST. Louis, MO, c1915(See Page 553 in BYB.) Engine is in Excellent condition, comes with 4 wheel Cart, Handle, Battery & Coil. Priced at $5695.00 includes crating and shipping to the nearest Fastenal Store to you that has a forklift(12 Pic).
2-1/4hp. Hiredman(LEFT HANDED), sn:126375(?), Trucks, Battery Box/coil/Battery included, Pulley, muffler and Lunkenheimer, complete nice Engine, Priced at $1195.00(6 Pic) No Barter or Tears, Send Time Zone for Shipping Quote.
2-1/4hp. Hired Man, Nice Magneto, Original Raised Letter Gas Tank, Good Solid Engine on Trucks, Albeit that the Color is not acceptable, will make an excellent addition to any collection(6 Pic) prices at 1396.00, No Barter or Tears, Send Time Zone for Shipping Quote.
1-3/4hp. United, Type 'A', SN:81599, complete, Excellend solid Engine. Has Fan, Battery Box, Batter/Coil furnished, nice 6" CI Pulley, decent Oiler and is skidded, Priced at $1295.00(5 Pic) Send Time Zone for shipping quote, NO Barter or Tears
1-1/2hp. Stover 'K', SN:72221, complete solid engine with nice pulley, pattery box, batter/coil furniched, decent oiler, missing the air flap on the Carb, Wick oiler on Crank journals, nice oak skids, priced at $1195.00(5 Pic) Send your Time Zone for shippng quote, NO Barter or Tears.
1-1/2hp. Stover 'K'
1-3/4hp. Frost King,SN:26284, Good Mag., , Muffler, Pulley, Heavy duty Homemade cart. $2195.00, crating included, send time zone for shipping Estimate.(5 Pic) No Barter or Tears.
1-3/4hp. Frost King
1.5hp. Dempster Mill, Restored, Excellent Condition, Nice Trucks, Battery included, $2750.00 and includes crating, send time zone for shipping Estimate. (6 Pic) No Barter or Tears.
1.5hp. Dempster Mill, Orig. Brass Tag.
1.5hp. Dempster Mill
1.5hp. Dempster Mill, Brass Gas Tank
1.5hp. Dempster Mill, Nice Oiler
1hp. R&V, SN:AL15366, Restored, very sharp, Battery/Coil included,Very nice CB/VT oiler, Priced at $3500, includes crating, send time zone for shipping Estimate.NO BARTER or Tears, (5 Pic)
1.5hp.Gade with Mag. Very good compression, cranks & runs well, wheel barrow type cart, as tags were on the Battery Box, this one has none, good solid engine, Priced at $2750.00 & includes crating, send time zone for shipping Estimate.(4 Pic).No Barter or Tears.
1.5hp. Brownwall, skidded, excellent compression, cranks & runs well, Battery/Coil included, missing correct Muffler & Shrowd(?), Priced at $2495.000 & includes crating, send time zone for shipping Estimate. No Barter or Tears.
3-1/2hp. Gade, on Original Trucks, battery box with coil/battery, Excellent running Engine, Priced at $3895.00, includes crating, send time zone for shipping estimate. No barter or Tears.
1-3/4hp. Litle Jumbo, rebuilt Mag., needs permenant gas tank, skidded, cranks & Runs**Part of the Linkage is Homemade and is not 100% correct, as the Engine will not stay running(see picture 5), excellent compression and is a good solid Engine, Priced $769.00 & includes crating, Send time zone for shipping estimate.(6 Pic) NO Barter or Tears.
(1913)2hp. R&V, Triumph Line, "L" Series, SN: BL33094,Flyball Gov., Recent Restoration, has not been run in(NO Gas or Oil in Engine)), Skidded, Battery Box, Battery Included, Priced at $2885.00, includes crating, send time zone for shipping estimate. (5 Pic) No Barter or Tears.
2hp. R&V, SN: BL 33094
2hp. R&V, SN:BL33094
2hp. R&V, SN: BL33094
2hp. R&V, SN:BL 33094
1hp. Rock Island(Un-Molested), Orig. Brass Tag., Wizard Magneto, Orig. Trucks: Good CB/VT Oiler, apparently the Gas Tank is not original, Cranks easily and runs extremely well, Priced at $2295.00 & includes crating, send time zone for shipping estimate. (7 Pic) No Barter or Tears.
1hp. Rock Island
1hp. Rock Island (Orig. Wizard Magneto)
1hp. Rock Island(orig. Brass Tag)
1hp. Rock Island, Unmosteted, Orig. Trucks, Brass Tag, Muffler, CranK Guard and Magneto.
1.5hp. Woodpecker, Older Restore, Battery Box/Battery/included, #Note: this Woodpecker is Early and has the Tank underneath the Engine:Skidded.(Engine is plumbed and Runs) Priced at $1195.00 & includes crating, send time zone for shipping estimate. (8 Pic) No Barter or Tears.
1.5hp. Woodpecker, Early.
1.5hp.Woodpecker, Early, Gears in Very Good Condition
1.5hp. Woodpecker, Early, Battery Box/Coil/Batt/Included.
1.5hp. woodpecker, Early.
1.5hp. Woodpecker,three repo. parts on engine, other than that Mostly unmolested, Skidded. Priced at $1195.00 includes crating, send time zone for shipping estimate. (10 Pic) No Barter or Tears.
1.5hp. Woodpecker, some pinstriping and Decal Remain
1.5hp. Woodpecker, gear look good.
1hp. R&V, Governor in Flywheel, complete & Runs, good Homemade Trucks, Good Original Gas Tank,Coil & Battery Furnished. Priced at $1650.00 & includes crating, send time zone for shipping estimate. (7 Pic) No Barter or Tears.
(1915)1hp. Leader, SN:V138037, with Orig. Brass Tag, Restored , Nice Galloway Cart, Oak Battery Box, Battery/Coil Furnished, Crank Guard and Pulley,niceEssex CB/VT Oiler. Can crate/Ship/or U can pick up. I can get you some excellent shipping rates, send zip code and USPS address for quote, $2295.00) (5 Pic) No Barter or Tears.
(1910)1.5hp. Rawleigh, Restored, SN:22550, Good Trucks, Oak Battery Box, Battery/Coil Furnished, Nice Essex CB/VT Oiler, 6" Pulley, Priced at $2295.00 & includes crating, send time zone for shipping estimate. (5 Pic) No barter or Tears.
Restored Corn Grinder, 24-1/2" Tall, 10" F.B. Pulley with 3-1/4" face, Priced at $475.00 includes crating, send time zone for shipping Est. (2 Pic)
Restored Corn Grinder
Large Restored Corn Grinder, 31" Tall, 13" Dia. Hopper, 12" F.B. Pulley with 3-12" Face. Priced at $525.00 includes crating, send time zone for shipping Est. (2 Pic).
Large restored corn Grinder
MORSE, 66:1 Gear Reducer: Made Eberhardt-Denver Plnat, Pulley is 9" Dia. with 7/8" grove for flat belt. Complete, turns easily and is in very good condition. Priced at $295.00 includes shipping to the nearest Fastenal Store to your location.(6 Pic)
HAYES, #1 Cow Pea Attachment, complete in very good condition, $145.00 prepaid to your USPS address. (4 Pic)
Cow Pea attachment
Cow Pea Attachment
Montgomery Ward Corn Grinder, very unusal, belt driven and in excellent restored condition. Details: 23" Tall, 10" wide at widest point of Gear guard, and 10.5" wide(point of adjustment shaft to pulley). Gears: Large gear is 8.5" dia, Bull Gear is 2.5" dia and V-Belt Pulley is 10" dia with 1/2" groove. Priced at $475.00 includes crating & shipping by Fastenal to the nearest Store to you.(5 Pic)
MW Corn Grinder
6" Belt Lacer, All original, excellent conditon with both original handles, $275.00 Prepaid to your USPS address (4 pic)
INFANTS COFFIN, made in SC appx. 1920's, wood of Southern Yellow Pine, excellent condition. In this period of time the Still Born or short lived Infant was wrapped in Material of choice and placed in Box, and directly buried in ground; NO amenties of cloth was ever evident in these early Wood coffins. Measurement: Overall; 26.5" Long x 11" wide x 10" deep and lid overhands 1/2". Inside Dimensions: 25.5"10" x 6.5", bottom is 8.5" so it is slightly v shaped, very simple catch that works, some decorative work on lid. Priced at $450.00 includes shipping to your USA address by Fastenal and insured. (6 Pic)
Infants Wood Coffin
Restored Corn Mill, complete NO broken feet, good plates, 22" Tall, 10" dia hopper, 8" F. Belt pulley x 2" face.
Priced at $475.00 includes crating & shipping to the nearest Fastenal Store to your location. (2 Pic)
Restored Corn Mill with Flat Belt Pulley
Repoduction, FULL size 'Yellow Dog' OIL WELL SUPPLY Lantern, complete with handle, top, and Wick(s). Price is:
$199.95 and includes Packing and shipping to the nearest FASTENAL store to your location. NO Barter or Tears.
Original Crank Handle for 2hp.Domestic/Atlantic SS Engine, Excellent some 'tooling' remains on the wooden Handle, Shipped postpaid to your USPS address for $113.96.
(3 Pic) NO Barter or Tears.
Domestic Crank Handle
Finished re-cast Monitor x-head, $55.00/includes shipping to your USPS address.
Finished Pump X-Head for Pump Jacks, including U-bolts as shown to hold arms, $60.00 and includes postage to your USPS address. (3 Pic).
Finished Pump Jack X-head for JD/or/Dain Pump Jacks,
Finsihed JD/Dain Pump Jack X-head
Re-cast pump-Jack connector, U drill holes. $50.00 (2 Pic)
Re-cast Pump-Jack connector.
JD Muffler(look-a-like) fits 1.5hp. JD 'E' good condition includes correct nipple to install on your Engine. $19.00 and includes shipping to your USPS address (2 Pic) NO Barter or Tears.
JD Look-a-like Muffler
13" Small Brunner A/C, Not Broken up, appears to be complete,good compression, 13" Flywheels, with Curved Spokes, 1-3/4" face and is 13.5" Tall, Mounting Base & Holes are in Excellent condition. Priced at $133.95, includes crating & Postage to your USPS address.(4 Pic) NO Barter or Tears.
DAIN Pump Jack in Excellent condition, includes, Rails, Cross Head, pump/pipe Holder and all that you see in this and the following Photos. Priced at $424.00, Shipping Extra, send Time Zone for shipping Estimate, NO Barter or Tears (8 Pic)
Dain Pump Jack
Cross head/goes with DAIN pump-jack
Pump Jack Adapter
1hp. Mogul Original Crank Handle, excellent condition, priced at $125.00 postpaid to your USPS address,(3Pic)
1hp. Mogul Crank Handle
Single Maytag Skid, made of Pine with walnut center, priced at $85.00, shipping included to your USPS address(2 Pic)
Single Maytag Skid
WORKING,Tri-Plex Horn set, by "Quality Automotive Equip" manufacturers Since 1910, NY, Longest Horn is 20", Next 17" and then 15", Decal in very good condition,Original Mounting Bracket and original contact points(screws/nuts) Some orig. Green pain evident, Works on a 12V Battery best, Sounds like a 'Train'. Continual contact for an extended period is not recommenec as the windings will get too how and in some cases 'melt' or fuse together. This set is thought to be in the 30's for a Truck, ALL three horns work and can be heard for quite a distance.
Priced at $179.95 and includes packing and postage to your USPS zip code, NO Barter or Tears (4 Pic).
Tri-Plex Horn Set
EMBOSSED,Hand Corn Sheller, complete, cobb ejector, wood handle flawed some, OA condition, Excellent, Brand is: Brinly Hardy Co., Louisville, KY, Pat. Date 1905, attached to nice OLD wooden box, can ship sheller in Box or ship without, priced at $95.00, calculate shipping on 30#(Less without the Box) from Zip Code 27517 (3 Pic) No Barter or Tears.
Hand Corn Sheller
Edison Home Phonograph, Good motor that is complete and running, nice oak Box, excellent decals, comes with orig. crank handle, missing the Mandrel and 'C' reproducer. Cost is $295.00 and will pack properly, calculate shipping from Zip Code on 35# (5 Pic.) No Barter or Tears.
Edison Home Phonograph
Edsion Home Phonograph
Corn Sheller, excellent condition, complete for shelling corn with cobb ejector, missing one Metal keeper(see Boattom Left) easy fix, good wooden Handle, embossed "mallable" on handle, probably a Black Hawk, BUT is not marked, shipping weight is 22# so figure $1 per pound from zip code 27517, cost is $85.00, plus shipping, will pack at NO charge.(4 Pic) No Barter or Tears.
Table Top Corn Mill by Black Hawk(6 x 5" opening) 10" overall, made in MD, complete, good wooden handle, embossed, very nice hard to come by unit, priced at $125.00, and includes shipping to your USPS address. (7pic) No Barter or Tears.
Table Top Corn Mill
Table Top corn Mill
SHOULD YOU WANT TO DRESS UP YOUR DISPLAY, HERE IS A Very Attractive, working Wooden Battery Box, with both High & Low Tension connectiors, on/off switches, plug to charge the 12V Gel Cell rechargeable Battery(included), All Leads. Price is $250.00, plus shipping: Note: shipping weight is 22# and I would fashion a wooden box to ship in, Send your USPS zip code for shipping Estimate.(5 Pic) No Barter or Tears.
Wooden Battery Box
Reproduction Brass Tag for Jacobson Engine
$22.00 Postpaid to your USPS address.
1-3/4hp. Original Mogul Crank Handle in Excellent Condition with No c/b/w, part # 1520-T, fits shaft size 1-1/2", Shipped Post Paid & Insured to your USPS Zip Code for $125.00,(2 Pic) No Barter or Tears.
1-3/4hp.Original Mogul Crank Handle
1-3/4hp. Mogul Pulley, No c/b/w, primed, fits shaft size 1-1/2", 6" dia x 5-1/2" Long, Shipped Postpaid & Insured to your USPS Zip Code for $125.00(3 Pic) NO Barter or Tears.
1-3/4hp. Mogul Pulley
"Tin Tim", Cranks off the Battery you are charging, all CI, Not many of these around in this condition, nice compact unit, priced at $825.00(5 Pic) , Send USPS for shipping quote. No Barter or Tears.
'Iron Horse' Gen/Set, including nice set of trucks, complete one of the nicest ones I've handled in many years, Priced at $995.00(5 Pic) Send USPS for shipping Quote, NO Barter or Tears.
Black Powder Wedge, For Work or Fun, 14.5" Long x 2" Dia, with snout, and hole for powder. Wedge si capable of splitting a 12' log in quarters when used properly. Shipped Postpaid to your USPS Zip Code for $175.00(4 Pic) No Barter or Tears.
Black Powder Wedge
NOS Plug in Original Box, Box in very good condition, $32.50 ships prepaid to your USPS Zip Code(2 pic)
NOS Remtz Plug in Orig. Box in very good condition
Re-Furbished T-Model Coil, with Brass connectors soldered on end and side. $30. plus shipping. (2pic) NO Barter or Tears. .
Re-Furbished T-Model Coil
2#, 7" 2post Coil, New. $55.00, plus shipping, NO Barter or Tears .
48" BEAR Trap, Blacksmith made in very good condition; Price is $1500.00 and includes crating & Shipping to the nearest Fastenal store to your location. (3 Pic) NO Barter or Tears.
48" BEAR Trap
7" Bigelow KILLER Trap, very good condition, Price is $98.00 and includes shipping to your USA USPS address.NO Barter or Tears.
Original clutch Pulley for a 15hp. Fairbanks Morse Z Engine. Pulley is 9" wide and 20" in Dia. There are NO wood blocks in this pulley, rather metal to metal. Pulley has one weld on the outer edge of Plate(hairline crack that was v'd out and welded properly) does not/would not affect the clutch/Pulley operation. This is a RARE pulley and extremely hard to come by. The price is 1350.00 and that includes Crating &/ shipping to the nearest Fastenal Store to your location.(2 Pic) No Barter or Tears.
15hp. Fairbanks Morse Z Clutch Pulley
19" Cast Iron v-Belt flywheel 7/8" hole(has brass shim in place), 2 set screws, Excellent condition Priced at $55.00 and includes packing & shipping to your USPS address.(2 Pic)
Pair of Puppets for 1(one money). It is told that these were hand made in Pa. in the mid 30's, there is (1)one hand missing from the Clown, other than that, Both are complete, has the wooden Pc.&String that work the puppets, clothes are in relatively good condition indicating that they have NOT been stored in an attic, Look all the Pic. over and decide if you want to own this Pc. of Folk Art. Both Pc. shipped prepaid and Insured to your USA Zip Code for $67.00, No Barter or Tears (6 Pic)
Pr. of Puppets
78 Rpm Phonograph Motor, Excellent Condition, Good springs, gov. works, very clean, includes the original Handle, $39.95, shipped prepaid to your USA Zip Code(5 Pic)
78 rpm Pnono Motor
78 rpm Phono Motor
78 Rpm Phono Motor
Tester for Model T coils, comes with 12 Volt rechargeable gel cell battery, spark plug, all connectors and nice wooden case, **COIL NOT INCLUDED, Shipped prepaid to your USA Zip Code for $72.00 (3 Pic)
Tester for Model T- Coils
Gilbarco Fuel Nozzle, aluminum, very nice shape, look to be complete. Priced at 79.95, shiping included to your USPS Address.(4 Pic)
Gilbarco Fuel Nozzle
Gilbaro Fuel Nozzle
Gilbaro Fuel Nozzlel
IHC, by ERTL, NOS, $45.00 PP L-48
IHC by ERTL, Orig. Box
IHC by ERTL, NOS, in Orig. Box, $48.00, PP L-48
IHC Titan, by ERTL, NOS, with Orig. Box, $65.00, PP L-48
IHC Titan by ERTL, Orig. Box
Edison Dia. Disc. Phonograph, $1295.00, Other pictures and Descp. Follows.
EDISON DIAMOND DISC.PHONOGRAPH, Totally Refinished, and Refurbished, TWO HEADS, one for Dia. Disc Records(the thick ones) and a 78 Rpm head, simply turn the Knurled knob and change heads to play either a 78rpm or Dia. Disc. Record, 72 Dia. Disc. Records and 50 78rpm records are included, cabinet is 52" Tall and 21" square, the Turntable has the original felt, all brakes work and spring is Strong and will play several records on one winding, original handle, all decals, and award winning logos atttached, a finer one will be very difficult to come by: NOTE: Would be best if this unit is picked up, I can crate and ship but will be a bit pricy, send zip cod for estimate: Method of payment is EBT only(CASH is picked up), Price is $1295.00(8 Pic).
Edions Dia. Disc
Edison Dia. Disc.
Edison Dia. Disc.(showing the 78rpm Head)
Edison Dia. Disc. (showing 72 Dia. Disc. Records)
BRASS Flange, inside 1-1/2 NPT, 4-1/4" Long by 2-5/8" at widest point, $18.00, Prepaid in L-48 States (2Pic)
BRASS Flange 4-1/4" Long
L-I Wico Mag,( rebuilt/shelved since)on correct unit with idler for Atlantic SS, $475.00, Shipping & Insurance extra(3 Pic) No Barter or Tears.
L-1 Wico Mag.
L-I Wico Mag..
NOS, Mint in Box Hess Minature Truck, $37.50, Prepaid to any Zip Code in Lower 48 States(2 Pic )
NOS, Hess Minature Truck
STRIKE WATER ANYWHERE, complete Unit, works Great, Excellent Show Pc. or for The GrandKids, Pump has New washers and was Cast in Elizabeth City, NC, $299.00, No Barter or Tears.
STRIKE WATER ANYWHERE
Jacobsen Sideshaft Carb., 1/4" FM, probably fits small Sideshafts, $125.00, Postage paid to your USPS address, No Barter or Tears.
Magnet for Unknown Magneto, 4" Tall x 3/8" x 1-1/4", $17.50 (3 Pic) PP in L-48
3/4" Greas Cup with Factory Extension, 4-1/2" OA, 1/8",NPT, very Good Used Condition, $19.00, Prepaid USPS, Lower 48(2 Pic)
3/4" Grease Cup with Extension
"THE SHOCKER", Sold as a toy in the Early 20's, this one has been refurbished:New Bearings, Armature Shaft Straightned, New Armature Gear, Turned Armature Shaft, New (old wire) and repo "holders", See Pat. Date on Maple Base(Original), All that you see except the black wires and the metal Holders is original with on/off lever. Larger than the other one on my site and "WILL SHOCK" you....(the faster you turn the handle the more "shock" you get), $295.00,Plus Shipping(4 Pic) No Barter or Tears.
1.5hp. JD Pulley Adapter, with 3/4" shaft, 3/16" Keyway cut, receives V-Belt Pulleys, great for Ice Cream Makers, or other small gadgets, keeps the belt in line. $75.00 Prepaid in Lower 48 States. (2 Pic)
1.5hp. JD Pulley adapter
2 Post coil, 6-1/4" Long, weighs 3#, shipped prepaid to your USA Zip Code for $75.00.
Brass Primer Cup, 9/16" NPT, $17.50, PP L-48 (2 Pic)
Brass Primer Cup
Large Sheet Metal Gas Tank, 27' x 10' x 4", removed from a 3hp. FBM Raditor cooled engine, Tank is in pretty good shape, probably will need patching on bottom, slightly bent on the bottom, $45.00, plus shipping(probably around $18.00) to a USA zip Code. (4 Pic) No Barter or Tears.
Large Gas Tank
Trailer Hitch Lock, $35.00, PP L-48
Manzel, hand(mechanical) Oiler, appears to be complete(pls. inspect the following pictues) $145.00, prepaid to your USA Zip Code(5 Pic) No Barter or Tears.
1.5hp. WISCONNA, DUAL CARB.GAS OR KERO., Unmolested on Nice Oak Trucks. The Gas tanks are reproduction to scale, the Magneto is original to the Engine, has been repaired and shined, repro. Muffler, nice Check Ball/Vent tube Oiler, Some original Paint remaines, Very nice collectible Engine, Not Rare, But extremely hard to come by in this condition. $3250.00 (9 Pic.) No Barter or Tears.
1.5hp. WISCONNA, gears are very good, notice the original Paint.
1.5hp. WISCONNA, GAS/KERO.
1.5hp. WISCONNA, GAS/KERO, Unmolested Engine.
1.5hp. WISCONNA, COVER IS RAISED TO SHOW ACCESS TO ROD/BEARING, COVER IS DOWN IN THE NEXT PICTURE.
1.5hp. WISCONNA, COVER DOWN AND LOCKED, NOTICE SOME ORIGINAL PAINT.
1.5HP. WISCONNA, Oiler/check ball/vent tube.
1.5hp. Wisconna, Web. Magneto, original to this Engine.
1931 2hp. Domestic Pump Engine, nicely done on Domestic Trucks with handle.Crank guard cover, gear cover and correct muffler. Nice finger jointed Oak Battery Box, Battery & coil included.$3399.00(10 Pic) NO Barter or Tears.
(**PRICE INCLUDES CRATING & SHIPPING TO YOUR NEAREST FASTENAL STORE.( Except CA)
1931, 2hp. Domestic Pump Engine.
1.5hp. Domestic, Pumping Engine, SN: 29731(1930), complete, Good non-original trucks, Older restoration, $3200.00.00, includes crating, send time zone for shipping est.(6 Pic) No Barter or Tears.
1.5hp. Domestic, Pumping Engine
1.5hp. Domestic Pumping Engine
1.5hp. Domestic Pumping Engine, Orig. Tag.
2hp. Domestic SS, on Orig. Trucks, Mostley Un-Molested, Bullet Tank probably is not Original, all else is, two welds on pump head, Piston to Pump is free and works in and out, Very Nice Unit, some Paint and Pin Striping remain, $3200.000 & includes crating, send time zone for shipping estimate.(10 Pic) No Barter or Tears.
2hp. Domestic SS( 1925)
2hp. Domestic SS with Pump, Bull Gear Cover & Orig. Trucks.
2hp. Domestic SS, Bias Gear in Excellent Condition, very little wear.
2hp. Domestic SS, with Pump
2hp. Domestic SS
2hp. Domestic SS with Pump, WELD on pump head
2hp. Domestic SS with Pump, 2nd. weld on Pump head.
2hp. Domestic SS with Pump, Correct Carb.
2hp. Domestic SS, with Pump, Very Nice Outfit.
1.5hp. Stove Pipe Domestic, SN:8991 (1914), UNMOLESTED, Skidded, Some Paint & Pinstriping remain, Battery/Box/coil/battery(12 V. Gell Cell)/leads inlcluded**This is one of the Nicest Stove Pipe Engines I've Handled in the Last Several years, looks Super, Runs super, these are extremely hard to come by in this Condition, $7500.00 (10 Pic) No Barter or Tears.
Stove Pipe Domestic (1914)
Stove Pipe Domestic(1914) Some Paint & Pinstriping Remain.
Stove Pipe Domestic(1914)
2-1/2hp. Christensen SideShaft, one of the smaller nice Sideshafts, Runs extremely well, good trucks, gas tank, Battery/Coil furnished, $9700.(10 Pic) No Barter or Tears.
#1 Lunkenheimer, all glass good, Excellent condition, Shipped postpaid to your USPS Zip Code for $49.95(2 Pic)
NOS, Brass Oiler, Large, 10" Tall x 3-1/2" dia , Glass Good, No ID, apparently never used, Wooden Knobs are Old and have been added, replacing the Kralastic ones. $175.00, PP to your USA Zip Code (5 Pic)
NOS Brass Oiler
American Injector Co., Detroit, Large Oiler, holds 1 Pint, both Glass's are good, both wooden Knobs are good, size: 12.5" x 6.5", $190.00, prepaid to any zip code in Lower 48 States(USA) will ship to others, write for Rates(4 Pic)
American Injector Co. Oiler
Amercian Injector Co. Oiler
#6 Michigan Swing Top Pump Oiler, Plated,Glass Good, few Wrench marks, over all condition, VERY GOOD, $275, PP in Lower 48 States(USA)(7 Pic)
#6 Lunkenheimer, All Original, Both Glass Good, Highly Polished, $250.00 Plus Shipping(3 Pic)
#6 Lunkenheimer Swing Top Oiler, Orig. Knob
#5 Lunkenheimer, Swing Top, Excellent, Both Glass Good, Highly Polished, $250.00,Prepaid & Insured to any Zip Code in Lower 48 States(USA), (2 Pic)
#5 Lunkenheimer , Swing Top Oiler, Excellent Condition
Small unusal Machinge Oiler, both Glass good, has rachet to adjust oil, $29.00, PP in L48.(4 Pic)
Small Rachet Machine Oiler
#1-1/2 EMBLEM, by Lunkenheimer, both Glass good, check ball intact, 3/8" NPT, No wrench marks(the few scratches that exist are probably due to human handling), wooden handle in excellent condition, 7.5" OA, Oiler appears to be NOS, $250.00, Shipping & Insurance included, but ships only to Lower 48 States(USA)WILL SHIP ELSEWHERE, WRITE FOR QUOTES(5 Pic)
Michigan CB Oiler, #45A5-1, 3/8" NPT,Top Glass Cracked, bottom glass good, OA, good condition, $35.00, prepaid in Lower 48 States (4 Pic)
Powell-Cin, Viking #2,3/8", NPT, all Glass/threads good, very few dings,Clear markings, refurbished and Highly Polished,
$125.00. PP, Lower 48 States (2 Pic)
Powell-Cin Viking #2, (2 Pic)
Lavigne #1, 1/4", NPT,Complete, Re-Furbished, Both Glass Good, few wrench Marks, Highly Polished, $100.00, (2 Pic)PP Lower 48 States.
Lavigne #1, Picture #2
Lavigne #1, Refurbished, Both Glass Good, Highly Polished, few Wrench Marks $90.00, PP Lower 48 States.
NOTE: The extra pc. you see in the picture holds the Check ball and works like it should, two lower rows(rings) of threads on the oiler that held the Check ball were broken off, this pc. allows used of the Oiler and only raises the height a little. Any ? write.
Michigan #484, Complete, Refurbished, both Glass Good, Highly Polished, few Wrench marks, $75.00, PP Lower 48 States.
Viking #3, Complete, Refurbished, Few Wrench Marks, Highly Polished, Both Glass Good, $250.00, PP Lower 48 States. NOTE:This oiler is stamped #3 but it appears to be the same size as a #2; Any ? write.
Michigan #483, CB, both glass's good, complete nice small oiler(probably #2 or smaller) 55.00 prepaid to any Zip code in L-48 (USA) 3 Pic.
Michigan #48A8S, New Glass & Gaskets, Repo. filler Plug, some wrench Marks, Check Ball/Vent Tube, 1/4" NPT, Very Good Condition, $55.00, inlcudes Postage to Any Zip Code in L-48 States.(3 Pic)
#5 Lunkenheimer Oiler, both glass good, 3/4" npt, OA condition: Exc.$75.00, postage & Insurance paid in L-48.
Nathan 1 oz. Brass Greaser, 1/2" NPT, Exc. condition, $16.50, (2 Pic)
Nathan Brass Greaser
SHERWOOD MACHINE OILER, 6-1/2" OA, 2-1/2" Dia., Left handed threadsm Both Glass's good, 5/8" NPT, Very good condition, $95.00,Prepaid in L. 48 States(4 Pic).
Sherwood M. Oiler
NATHAN CHECK BALL, nickel plated oiler, both glass good, Top glass has two chips , but does not affect opperation of oiler.stampet 846( probably = to size 2) $55.00PP in L-48(USA) (4 Pic)
1920's Wicker & Leather 'Baby Pull' in RESTORED condition. Size: 42" long including handle, 34" tall at highest point on Hood, 15" Wide, wheels 10". Folds down for storage, small wheels on front to move once folded down. Priced at $195.00 plus shipping, Write for details. Payment: Only accept Paypal.(3 Pic)
(#1)Rett Butler,Franklin Mint Doll(1987),$195.00, Plus Shipping.
Scarlett O'Ohara by the Franklin Mint(1985), $195.00, Plus shippng.
Melanie by The Franklin Mint(1986), $195.00, plus shipping.
Ashley Wilkes by The Franklin Mint (1988), $195.00, plus shipping.
Undressed Antique German Bisque head doll, A. W. special, 26", Jointed, $350.00, plus shipping.
Antique bisque head , Kid body, #3700 by Armand Marseille, chip in thumb & forefinger(see close up pictures), 16", $195.00, plus shipping(2 Pic)
16" composition Shoulder head by Atlantic Co. , Original Clothers, Excellent condition, $95.00, plus shipping.
Waside Inn from the Currier and Ives collection, New, $35.00, plus shipping.
Antique Doll Faint Couch, has been recovered, Small, Very Nice, $95.00, plus shipping, (2 Pic)
Doll Faint Couch.
Vinyl Nurser, unmarked, redressed, c1950's, $35.00, Prepaid to any Zip Code in L-48 - States.
Vinyl Nurser, Unmarked, Redressed, c1950's, $35.00, Prepaid to any zip code in L-48- States.
antique K&R, #126, 28", Head by Simon & Halbig,Dressed as a boy in Old clothes, Excellent conditon, $1200.00, Plus shipping.
Antique Baby Bugge, Original, Black sleigh Tyoe made by F. A. Whitney Carriage Co. repo, upholstery, Carriage in EXXCELLENT CONDITION, Can dis-assemble and ship, Deliver, or U can pick up, zip code for shipping estimate, $295.00(10 Pic)
Bisque Head Doll by Herrich-Handwerck, Germany, Head by Simon & Halbig, New Human Hair wig, old clothers, ball jointed composition body, 30", $1100.00, plus shipping.
"Precious Moments" Doll, 12", New, $35.00. prepaid to any zip code in L-48.
1950's Ginny 'Look Alike', all Original, Excellent condition, includes Stand, shipped prepaid to any zip code for $68.00
"The Dutchess" New, Stand included, Shipped Prepaid for $55.00 to any Zip Code in L-48.
"toni" Doll by Ideal, Original Outfit, 14", Stand Included, Prepaid to any zip in Lower 48 for $145.00
"JOCKEY' Button Hook, 5-1/2" Long, Excellent condition, these were used to 'button' the Old High Top Shoes, Steel shank, Body is Probably Celluloid, dates to Early '30's, $75.00, prepaid to any Zip Code in Lower 48 States (7 Pic)
'JOCKEY' BUTTON HOOK
1-1/2hp. John Deere, complete, cranks & runs good, on homemade trucks, 1 wheel has a chip out of the edge.
Priced at $1450. includes crating and shipping to the nearest Fastenal Store to your location. No Barter or Tears. (4 Pic)
1-1/2hp. John Deere
Restored Corn Grinder, 25" Tall, 12" dia. Hopper, 9-1/2" F. B. Pulley with 3" Face. Priced at $525.00 includes crating and shipping to the nearest Fastenal Store to your location. NO Barter or Tears. (2 Pic).
Restored 25" Corn Mill
Restored David Bradley Corn Grinder, #578E, weighted 6" Pulley, 10-1/2" weight wheel, 14 x 14" Hopper. Feet are NOT broken. Priced $525.00, includes crating and shipping to the nearest Fastenal Store to your location. No Barter or Tears (3 Pic)
Restored David Bradley Corn Grinder
2 in 1 Restpred Small Corn Mill. 16" Tall, with 6" hopper. Your get the Corn Mill, 1/2 hp. Elec. motor, two pulleys(one for the Elec. Motor and one flat belt, v belt included. Priced at $325.00, includes crating and shipping to the narest Fastenal Store to your location. (4 Pic) NO Barter or Tears.
2 in 1 Corn mill
2 in 1 Corn Mill
F. G. Sterns #6 Green Bone Cutter: Mgf. in Syracuse, NY and patened in 1898, this is a very unusal B. cutter. The skeleton is very attractive in cast iron as all other componets are. 47" Tall, skeleton is 22" x 14", flywheel is 19-1/4" dia with 2-1/4" Face, bone pot is: 8" x 4". Knives are in very good condition. Handle has 4 adjustments(for arm length and height. Priced @ $595.00 includes crating and shipping to the nearest Fastenal Store to your location. (8 Pic) NO Barter or Tears.
Skeleton for Bone Cutter
Bone cutter Pot
Bone Cutter Knives & Gears
Bone cutter, 4 adjustments on handle
Restored Root Cutter, i.e. Beet Grinder/cutter, made in England and shipped to the Northern States for shreeding/cutting/etc. Sugar Beets. This one came from North Dakota. It is complete and in excellent condition. Details: 45" Tall, 24" wide at top, 17-3/4" x 3" Flat Belt Pulley, Hopper is 25-1/2" ,slightly oval and is 15-1/2" at center. All upper part is Cast Iron, the four legs are steel.
Probably one of the Most interesting ttems I've place on my site in quite some time. Priced at $595.00, includes crating and shipping to the nearest Fastenal Store to your location. (8 Pic) NO Barter or Tears.