1-1/2hp. Olds, restored, on a set of nice trucks. This is a show stopper and would be a nice addition to any collection. Priced at $4750. FOB, Chapel Hill, NC
(7 Pic) NO BARTER OR TEARS.
1-3/4hp. "Sultan" Vertical Engine, #3186, by Whitman Agricultural Company, ST. Louis, MO, c1915(See Page 553 in BYB.) Engine is in Excellent condition, comes with 4 wheel Cart, Handle, Battery & Coil. Priced at $5500.00, FOB, Chapel Hill, NC. (12 Pic). NO BARTER OR TEARS.
(DEPOSIT)1.5hp. Domestic Farm Engine, SN:12821(c1916), Lots of Brass, Oak Battry Box, Coil/Battery included. Sets on a nice set of Homemade Trucks(included). Probably one of the nicest Domestic Farm Engine to come up for sale in quite some time. Priced at 5750. includes crating & shipping by FASTENAL, 5500. if picked up.(8 PIC) Forms of payment preferred is EBT or CASH. NO BARTER OR TEARS.
DOMESTIC FARM ENGINE
2 hp. Domestic, Pumping Engine, SN: 29731(1930), complete, Good non-original trucks, Older restoration, $2400. FOB Chapel Hill, NC (6 Pic) No Barter or Tears.
1.5hp. Domestic, Pumping Engine
1.5hp. Domestic Pumping Engine
1.5hp. Domestic Pumping Engine, Orig. Tag.
2hp. Domestic SS, on Orig. Trucks, Mostley Un-Molested, Bullet Tank probably is not Original, all else is, two welds on pump head, Piston to Pump is free and works in and out, Very Nice Unit, some Paint and Pin Striping remain, $3200. FOB Chapel Hill, NC (10 Pic) NO BARTER OR TEARS.
2hp. Domestic SS( 1925)
2hp. Domestic SS with Pump, Bull Gear Cover & Orig. Trucks.
2hp. Domestic SS, Bias Gear in Excellent Condition, very little wear.
2hp. Domestic SS, with Pump
2hp. Domestic SS
2hp. Domestic SS with Pump, WELD on pump head
2hp. Domestic SS with Pump, 2nd. weld on Pump head.
2hp. Domestic SS with Pump, Correct Carb.
2hp. Domestic SS, with Pump, Very Nice Outfit.
Large Blower & Motor: 50hp.3 phase Elec. Motor by Westinghouse, 3550rpms, blower housing is plate steel, primed and ready to work. Size appx.: 3' wide at widest point, 50" tall, 24" Dia. Fan. condition is excellent. This unit was used very little: was oversized for a boiler and kept blowing the flame out and was removed. A smaller unit was installed on the Boiler. Appx. weight including the motor is 2200#. Shipping arrangements: Best to pick up and unit is located in Reidsville, NC and can be loaded with forklift, OR I can deliver to Portland, Ind. at the Spring swap, May 2015 for a fee. Priced at $750.00, would consider trades for Hit/Miss Engine(s), Maytags or Oilers..
Restored Corn Mill(Burr Mill), complete NO broken feet, good plates, 22" Tall, 10" dia hopper, 8" F. Belt pulley x 2" face.
Priced at $375.00 includes crating & shipping to the nearest Fastenal Store to your location. (2 Pic)
Restored Corn Mill with Flat Belt Pulley
EMBOSSED,Hand Corn Sheller, complete, cobb ejector, wood handle flawed some, OA condition, Excellent, Brand is: Brinly Hardy Co., Louisville, KY, Pat. Date 1905, attached to nice OLD wooden box, can ship sheller in Box or ship without, priced at $125.00, includes crating & shipping by FASTENAL. (3 Pic) No Barter or Tears.
Hand Corn Sheller
Hand Held Magnetic Tool, Excellent for small screws/bolts/nuts/etc. that get lost on the floor or work bench. Sweep the area with this tool and pick up, then pull the handle and it de-activates the magnetic force. Measures: 9.5 x 4.75 x 1.5", Priced at $75.00 includes shipping to your USPS address.(2 Pic) NO BARTER OR TEARS.
Restored Corn Grinder(Burr Mill), 25" Tall, 12" dia. Hopper, 9-1/2" F. B. Pulley with 3" Face. Priced at $395.00 includes crating and shipping to the nearest Fastenal Store to your location. NO Barter or Tears. (2 Pic).
Restored 25" Corn Mill
7" Bigelow KILLER Trap, very good condition, Price is $98.00 and includes shipping to your USA USPS address.NO Barter or Tears.
Hot coil in Oak Box, Priced at $55. includes packing & shipping to your USPS address(3 Pic). NO BARTER OR TEARS.
Embossed Monitor Gas Tank, Very good condition, Priced at 70. includes packing & shipping to your USPS address(3 Pic)
Monitor Gas Tank
"JOCKEY' Button Hook, 5-1/2" Long, Excellent condition, these were used to 'button' the Old High Top Shoes, Steel shank, Body is Probably Celluloid, dates to Early '30's, $75.00, prepaid to any Zip Code in Lower 48 States (7 Pic)
'JOCKEY' BUTTON HOOK
(SOLD)Priced at $10.00 PP
NOS, 168 Page 6 x 9" Book, Priced at $13.95 PP
Finished Pump X-Head for Pump Jacks, including U-bolts as shown to hold arms, $65.00 and includes postage to your USPS address. (3 Pic).
Finished Pump Jack X-head for JD/or/Dain Pump Jacks,
Finsihed JD/Dain Pump Jack X-head
3hp. FBM, Hit & Miss, complete and runs very good. Older restoration, skidded, correct repo muffler. HL crack at muffler port but does not leak when running. This is a very hard to come by engine and especially in this quality condition. Priced at $1995.00. FOB, Chapel Hill, NC. (11 pic)
3hp. FBM, H/M
3hp. FBM, HL crack shown.
3hp. FBM, H/M, Metal Oiler, probably orig. Equipment
Tom Thumb, SN:V2405(1908), Butter Churn/Gear and Pulley, Coned Pulley on Flywheeel, correct repo. Trucks, muffler and Gas tank, Decent oiler, Good compression, Battery/Coil incuded,No c/b/w that I can determine, from a Small Collection, Priced at $2500. FOB Chapel Hill, NC (4 Pic) NO BARTER OR TEARS.
10" Flywheel Ideal, SN:24557, Original Gas tank(repaired) and cast Iron Struts that hold the Tank. Very Strong Compression, cranks easily and run well.Belt, Battery Box/Battery/Coil included on 48" Skids, wired and ready to go. Faults:
no muffler, and crank cover has a chip in the lip and a h/l crack in the rear. Priced @ $1095.00, FOB, Chapel Hill, NC(5 Pic) NO BARTER OR TEARS.
10" Flywheel Ideal(original gas tank with original cast iron Struts.
10" Flywheel Ideal, Lunkenhiemer Carb.
10" Flywheel Ideal.
10" Flywheel Ideal
"THE ORIGINAL" by Ideal, restored, coned pulley, Fan/belt, correct Muffler, and skidded. NOTE: The Carb. on The Original was different than the later models.
Correct and original tag is attached to the skid foreground left, larger view follows. Priced at: $2300.FOB Chapel Hill, NC . NO BARTER OR TEARS.
1hhp. Gilson, very early, unmolested, good compression, pulley, gas tank, Battery Box(Battery/Coil) included, original Tag, nice Oiler and is skidded. NOTE: the end of rocker arm strut has been repaired(apparently many years ago), very nice early engine, Priced at $2600.FOB Chapel Hill, NC . (7 Pic) NO BARTER OR TEARS.
1-3/4hp. Frost King,SN:26284, Good Mag., , Muffler, Pulley, Heavy duty Homemade cart. $1895.00, FOB Chapel Hill, NC, (5 Pic), , NO BARTER OR TEARS.
1-3/4hp. Frost King
1.5hp. Brownwall, skidded, excellent compression, battery/Coil included, missing correct Muffler & Shrowd(?), Priced at $2400. FOB Chapel Hill, NC NO BARTER OR TEARS.
(1910)1.5hp. Rawleigh, Restored, SN:22550, Good Trucks, Oak Battery Box, Battery/Coil Furnished, Nice Essex CB/VT Oiler, 6" Pulley, Priced at $2150.FOB Chapel Hill, NC(5 Pic) NO BARTER OR TEARS.
Tom Thumb, , belt, fan, gas tank, muffler, belt pulley,no c/b/w known to me, Engine is on a correct yellow pine board, gas tank needs to be plumbed, Battery/Coil furnished, Priced at 1725, fob Chapel Hill, NC(5 Pic) NO BARTER OR TEARS.
1hp. R&V,nicely restored, good set of trucks, , excellent compression, CB/VT oiler, Battery Box/battery/Coil furnished, Pulley, , no c/b/w known to me, If you are looking for a very nice KEEPER then this is it, priced at 3500. FOB Chapel Hill, NC (6 Pic) NO BARTER OR TEARS.
1-1/2hp. Choreboy(the first Model) with large Magneto, Engine is complete, with muffler, gas tank, belt, pulley, crankguard, decent oiler, fan & all grease cups, ready to work or show. No c/b/w that is known by me.Priced at $1995. FOB Chapel Hill, NC (7 Pic) NO BARTER OR TEARS.
1-1/2hp. Gifford, Gearless Engine, on nice set of Trucks with oak skids, 1 braze(see picture 2 & 3) Little hard to come by in this condition, priced at $6600. FOB Chapel Hill, NC (9 Pic) NO BARTER OR TEARS.
#5, Mann's Green Bone Cutter: NOTE: This is a Portable model and is mounted on a Cream Seperator Stand. Flywheel is 23" in Dia., Pot does not open, has the correct weight and screw, nicely refinished, with Embossed letters. Priced at 550. includes crating/shipping by Fastenal . (3 Pic).
#5 Mann's Green Bone Cutter
Humphrey & Sons Green Bone Cutter. Nicely restored is this unusal Bone cutter, nice skeleton, Bone hopper has a wheel with rachet that depresses the bones as needed, note that this unit as pat'd in Canada also.( Pot is probably comparable to a #7 Mann's)Priced at $695. includes crating, shipping by Fastenal .(13 Pic)
H & Sons Green Bone Cutter
H. & Sons Green Bone Cutter
H. & Sons Green Bone Cutter, Embossed.
H. & Sons Green Bone cutter
Old Welding Cart in very good original condition. Priced at 125. (2 Pic) SHIPPED COLLECT BY FASTENAL. NO BARTER OR TEARS.
Old Welding cart in very good original condition.
Holder for Saws for setting teeth and or filing, complete all original, no c/b/w, bolts/nuts/screws are original, swivels at the Ball socket, Priced at $127.oo includes packing and shipping to your USPS address. (4 pic)
Pellet Pistol/Holster/Belt, Replica of '45', Pistol is complete, no compressed cylinders are included, Holster & Belt is of Genuine Leather, Holster swivels, Holster & Belt alone are worth the Price of $175.00 and price includes packing and shipping to your USPS address (3 Pic) NO BARTER OR TEARS.
Pellet Pistol , Holster & Belt
Pellet Pistol, Holster & Belt
John Deere 'E' toy by ERTL, NOS, $75.00 and includes postage to your USPS address. (2 Pic)
John Deere 'E'
DeLaval Cream Separator TOY by ERTL, 1/7 Scale, highly detailed, quality die-cast metal, operating crank and flywheel, has been displayed, box & toy in Excellent condition, $75.00 and includes shipping to your USPS address, (4 Pic).
IHC FAMOUS ENGINE ERTL TOY,Replica Special Edition, 1st in a Series (1992) NEW in Box,Highly detailed, quality die-cast metal, rotating flywheels, 1/8th scale,#615DA, MADE IN USA, Priced at $75.00 includes shipping to your USPS address (2 Pic)
ERTL TOY CORN SHELLER, 1/8 Scale, #4968, Cob elevator, anutheic stripes, movable flywheel and pulled/blower, has been displayed, Toy & Box in excellent condition, Priced @ $75.00 includes shipping to your USPS address (4 Pic)
ERTL TOY CORN SHELLER
Early 1900's Childs Toy, "THE SHOCKER", this one is HOT. To Play the game required two kids, one to hold in each hand a handle, the other turned the crank handle, Faster handle is turned the more 'juice' would go into the handles, the winner was the one that could hold on the longest. This one is has a maple base(4.5 x 3.5"), Flywheel is 2-1/8" in Dial, handles are repo., but the red wooden plugs on top are original, wire is old wire, but not original to the toy(The original wire will be enclosed when shipped). A highly collectible toy, that works, priced at $195.00 and includes shipping & insurance to your USPS address.(5 Pic)
The Shocker(the red wooden plugs are original)
IHC 7" Wrench, LOGO very strong, wrench in very good condition. (3 Pic) Priced @ $29.95, includes packing and prepaid postage to your USPS address. NO Barter or Tears.
ALL ORIGINAL FEED SACK DOLLY, Handles are 47" Long, 20-1/4" wide at top, to 12-1/2" at bottom, Metal U protudes 4-1/2", wheels are 6" Dia., wood is Maple. Excellent condition, Priced at $125.00, Includes shipping by Fastenal.(4 Pic) NO Barter or Tears
FEED SACK DOLLY
HAYES, #1 Cow Pea Attachment, complete in very good condition, $145.00 prepaid to your USPS address. (4 Pic)
Cow Pea attachment
Cow Pea Attachment
(HOLD)INFANTS COFFIN, made in SC appx. 1920-30's, wood of Southern Yellow Pine, excellent condition. In this period of time the Still Born or short lived Infants were wrapped in Material of choice and placed in Box, and directly buried in ground; NO amenties of cloth was ever evident in these early Wood coffins. Measurement: Overall; 26.5" Long x 11" wide x 10" deep and lid overhangs 1/2". Inside Dimensions: 25.5"10" x 6.5", bottom is 8.5" so it is slightly v shaped, very simple catch that works, some decorative work on lid. Priced at $450.00 includes shipping to the nearest Fastenal
Store to your location. (6 Pic)
Infants Wood Coffin
Original Crank Handle for 2hp.Domestic/Atlantic SS Engine, Excellent some 'tooling' remains on the wooden Handle, Shipped postpaid to your USPS address for $113.96.
(3 Pic) NO Barter or Tears.
Domestic Crank Handle
Finished re-cast Monitor x-head, $65.00/includes shipping to your USPS address.
Re-cast pump-Jack connector, U drill holes. $55.00 (2 Pic)
Re-cast Pump-Jack connector.
Reproduction Brass Tag for Jacobson Engine
$22.00 Postpaid to your USPS address.
(SOLD)NOS Plug in Original Box, Box in very good condition, $26.50 ships prepaid to your USPS Zip Code(2 pic)
NOS Rentz Plug in Orig. Box in very good condition
48" BEAR Trap, Blacksmith made in very good condition; Price is $1500.00 and includes crating & Shipping to the nearest Fastenal store to your location. (3 Pic) NO Barter or Tears.
48" BEAR Trap
Gilbarco Fuel Nozzle, aluminum, very nice shape, look to be complete. Priced at 79.95, shiping included to your USPS Address.(4 Pic)
Gilbarco Fuel Nozzle
Gilbaro Fuel Nozzle
Gilbaro Fuel Nozzlel
IHC, by ERTL, NOS, $67.50 PP L-48
IHC by ERTL, Orig. Box
IHC by ERTL, NOS, in Orig. Box, $75.00, PP L-48
IHC Titan, by ERTL, NOS, with Orig. Box, $75.00, PP L-48
IHC Titan by ERTL, Orig. Box
Edison Dia. Disc. Phonograph, $1295.00, Other pictures and Descp. Follows.
EDISON DIAMOND DISC.PHONOGRAPH, Totally Refinished, and Refurbished, TWO HEADS, one for Dia. Disc Records(the thick ones) and a 78 Rpm head, simply turn the Knurled knob and change heads to play either a 78rpm or Dia. Disc. Record, 72 Dia. Disc. Records and 50 78rpm records are included, cabinet is 52" Tall and 21" square, the Turntable has the original felt, all brakes work and spring is Strong and will play several records on one winding, original handle, all decals, and award winning logos atttached, a finer one will be very difficult to come by: NOTE: Would be best if this unit is picked up, I can crate and ship but will be a bit pricy, send zip code for estimate: Method of payment is EBT only(CASH is picked up), Price is $1295.00(8 Pic).
Edions Dia. Disc
Edison Dia. Disc.
Edison Dia. Disc.(showing the 78rpm Head)
Edison Dia. Disc. (showing 72 Dia. Disc. Records)
BRASS Flange, inside 1-1/2 NPT, 4-1/4" Long by 2-5/8" at widest point, $18.00, Prepaid in L-48 States (2Pic)
BRASS Flange 4-1/4" Long
NOS, Mint in Box Hess Minature Truck, $37.50, Prepaid to any Zip Code in Lower 48 States(2 Pic )
NOS, Hess Minature Truck
STRIKE WATER ANYWHERE, complete Unit, works Great, Excellent Show Pc. or for The GrandKids, Pump has New washers and was Cast in Elizabeth City, NC, $299.00, No Barter or Tears.
STRIKE WATER ANYWHERE
Jacobsen Sideshaft Carb., 1/4" FM, probably fits small Sideshafts, $125.00, Postage paid to your USPS address, No Barter or Tears.
Magnet for Unknown Magneto, 4" Tall x 3/8" x 1-1/4", $17.50 (3 Pic) PP in L-48
Large Sheet Metal Gas Tank, 27' x 10' x 4", removed from a 3hp. FBM Raditor cooled engine, Tank is in pretty good shape, probably will need patching on bottom, slightly bent on the bottom, $45.00, plus shipping(probably around $18.00) to a USA zip Code. (4 Pic) No Barter or Tears.
Large Gas Tank
Trailer Hitch Lock, $35.00, PP L-48
(HOLD) 8hp. Fairmont, complete , runs well, battery/coil furnished and is wired to knife switch, radiator look very good, appears to be all original equipment. Priced at 795. (6 Pic) NO BARTER OR TEARS.
1.5hp. WISCONNA, DUAL CARB.GAS OR KERO., Unmolested on Nice Oak Trucks. The Gas tanks are reproduction to scale, the Magneto is original to the Engine, has been repaired and polished, repro. Muffler, nice Check Ball/Vent tube Oiler, Some original Paint remaines, Very nice collectible Engine, Not Rare, But extremely hard to come by in this condition. $2999.00, FOB Chapel Hill, NC (9 Pic.)NO BARTER OR TEARS.
1.5hp. WISCONNA, gears are very good, notice the original Paint.
1.5hp. WISCONNA, GAS/KERO.
1.5hp. WISCONNA, GAS/KERO, Unmolested Engine.
1.5hp. WISCONNA, COVER IS RAISED TO SHOW ACCESS TO ROD/BEARING, COVER IS DOWN IN THE NEXT PICTURE.
1.5hp. WISCONNA, COVER DOWN AND LOCKED, NOTICE SOME ORIGINAL PAINT.
1.5HP. WISCONNA, Oiler/check ball/vent tube.
1.5hp. Wisconna, Web. Magneto, original to this Engine.
8hp. Fairmont, complete with all original equipment, includes, pulley, throttle & timer levers(embossed), Original Metal Battery Box with RR numbers clearly stamped on same, battery/coil furnished,Raditor(and is in excellent condition), Name embossed on front, good orig. name tag, embossed carb., cranks & runs well, Priced at $895. FOB Chapel Hill, NC (10 Pic) NO BARTER OR TEARS.
NOS, Brass Oiler, Large, 10" Tall x 3-1/2" dia , Glass Good, No ID, apparently never used, Wooden Knobs are Old and have been added, replacing the Kralastic ones. $175.00, PP to your USA Zip Code (5 Pic)
NOS Brass Oiler
#6 Michigan Swing Top Pump Oiler, Plated,Glass Good, few Wrench marks, over all condition, VERY GOOD, $275, PP in Lower 48 States(USA)(7 Pic)
#1-1/2 EMBLEM, by Lunkenheimer, both Glass good, check ball intact, 3/8" NPT, No wrench marks(the few scratches that exist are probably due to human handling), wooden handle in excellent condition, 7.5" OA, Oiler appears to be NOS, $250.00, Shipping & Insurance included, but ships only to Lower 48 States(USA)(5 Pic)
(#1)Rett Butler,Franklin Mint Doll(1987),$195.00, Plus Shipping.
Scarlett O'Ohara by the Franklin Mint(1985), $195.00, Plus shippng.
Melanie by The Franklin Mint(1986), $195.00, plus shipping.
Ashley Wilkes by The Franklin Mint (1988), $195.00, plus shipping.
Undressed Antique German Bisque head doll, A. W. special, 26", Jointed, $350.00, plus shipping.
Antique bisque head , Kid body, #3700 by Armand Marseille, chip in thumb & forefinger(see close up pictures), 16", $195.00, plus shipping(2 Pic)
16" composition Shoulder head by Atlantic Co. , Original Clothers, Excellent condition, $95.00, plus shipping.
Wayside Inn from the Currier and Ives collection, New, $35.00, plus shipping.
Antique Doll Faint Couch, has been recovered, Small, Very Nice, $95.00, plus shipping, (2 Pic)
Doll Faint Couch.
Vinyl Nurser, Unmarked, Redressed, c1950's, $35.00, Prepaid to any zip code in L-48- States.
antique K&R, #126, 28", Head by Simon & Halbig,Dressed as a boy in Old clothes, Excellent conditon, $1200.00, Plus shipping.
Antique Baby Buggy, Original, Black sleigh Tyoe made by F. A. Whitney Carriage Co. repo, upholstery, Carriage in EXCELLENT CONDITION, Can dis-assemble and ship, Deliver, or U can pick up, zip code for shipping estimate, $295.00(10 Pic)
Bisque Head Doll by Herrich-Handwerck, Germany, Head by Simon & Halbig, New Human Hair wig, old clothers, ball jointed composition body, 30", $1100.00, plus shipping.