FOR QUESTIONS ABOUT SHIPPING/PAYMENT/OR ANY OTHER CONTACT ME AT:
GREAT GIFT ANY TIME OF YEAR ARE THESE HAND MADE BLANKETS BY BOBBIE TRAMMEL****THESE COLORFUL BLANKETS, 36 X 44", DIFFERENT PATTERNS ON EACH SIDE, SATIN TRIM, NICE STITCHING & PADDED.
HAS A VARIETY OF USES: BABY BLANKET(INFANT TO 7YRS), LEG WARMERS, BABY DOLL BLANKETS, PET BLANKETS AND WALL DECORATIONS...MANY PATTERNS & COLORS; ADVISE IF FOR GIRL/BOY/PET/WALL DECORATION OR OTHER, PROBABY CAN MEET YOUR WANTS. PRICED AT 49.99 INCLUDES S&H IN US, OUTSIDE US WRITE FOR QUOTES. **ALSO CUSTOM WORK ON BLANKETS AVAILABLE. , .CONTACT ME THROUH THE PHONE # AND EMAIL AT TOP OF PAGE.
HAND MADE BLANKETS
2hp. R&V, SN:BL47907, Flyball Gov. restored , nice pulley, crank guard , muffler, Lunkenheimer Oiler and nice oak Battery Box. Excellent compression. Priced at 2995.00, can & will ship outside US.(12 Pic) NBOT.
John Deere IC maker outfit: New 8 qt. country freezer on IHC trucks with all belts. Ratio is correct and most of the hardware is shop made. John Deere Engine:SN:27448, Cranks and runs, G. tank has been repaired, no known c/b/w on engine. A hole has been drilled in the cover & has plug in it. Priced at $3650. FOB, Chapel Hill, NC. Crating is available/suggested Shipping by FASTENAL. Any questions contact me through Harry's Page. (10 Pic) NO BARTER OR TEARS.
IC Maker Outfit
Cushman Cub nicely restored on a good set of trucks with angle iron frame, 2x5" pulley, good wico mag., correct carb. that is not broken. Priced at $725.00 and includes crating and shipping by FASTENAL. (4 pic) NO BARTER OR TEARS.
1hp. Famous, restored. DETAILS: The Butter churn gear/pulley/Magneto holder is ONE pc.,and very difficult to come by, mag is correct as is the gas tank, muffler, and truck which is original stock.
The battery box is made of seasoned poplar to scale and lettered in 14c Gold leaf, nice oiler and correct hopper cover. New Rings and all new springs are in place. If you are looking for an exceptional small engine then this is probably one of the nicest you will find. Priced at $3500. includes FULL crate and shipping by FASTENAL.
NO BARTER OR TEARS.(8 PIC)
1,5 Econ, Webster Mag(HOT), Nice set of Trucks(included), pulley, muffler and NICE oiler. Engine cranks easily and runs well. Priced at 1050. includes full Crate. Shipping Extra.Zip code for Shipping Estimate. NO BARTER OR TEARS.
1-1/2hp. Olds, restored, on a set of nice trucks. This is a show stopper and would be a nice addition to any collection. Priced at $4750. and includes Full crate and shipping by FASTENAL.(7 Pic) NO BARTER OR TEARS.
1-3/4hp. "Sultan" Vertical Engine, #3186, by Whitman Agricultural Company, ST. Louis, MO, c1915(See Page 553 in BYB.) Engine is in Excellent condition, comes with 4 wheel Cart, Handle, Battery & Coil. Priced at $5500.00, and includes Full crate and shipping by FASTENAL.(12 Pic). NO BARTER OR TEARS.
2 hp. Domestic, Pumping Engine, SN: 29731(1930), complete, Good non-original trucks, Older restoration, $2400. FOB Chapel Hill, NC (6 Pic) No Barter or Tears.
1.5hp. Domestic, Pumping Engine
1.5hp. Domestic Pumping Engine
1.5hp. Domestic Pumping Engine, Orig. Tag.
2hp. Domestic SS, on Orig. Trucks, Mostley Un-Molested, Bullet Tank probably is not Original, all else is, two welds on pump head, Piston to Pump is free and works in and out, Very Nice Unit, some Paint and Pin Striping remain, $3200. FOB Chapel Hill, NC (10 Pic) NO BARTER OR TEARS.
2hp. Domestic SS( 1925)
2hp. Domestic SS with Pump, Bull Gear Cover & Orig. Trucks.
2hp. Domestic SS, Bias Gear in Excellent Condition, very little wear.
2hp. Domestic SS, with Pump
2hp. Domestic SS
2hp. Domestic SS with Pump, WELD on pump head
2hp. Domestic SS with Pump, 2nd. weld on Pump head.
2hp. Domestic SS with Pump, Correct Carb.
2hp. Domestic SS, with Pump, Very Nice Outfit.
2hp. Domestic, SN: 29029(1931) on attractive drop frame cart of heavy Oak, good trucks, handle, All appointments to engine is there, nice Lunkenhiemer Oilers. Priced at $2995.00 includes Full crate and delivery to Fastenal. Contact me for shipping quote.Engine can be picked up at 27517. NO BARTER OR TEARS. (10 PIC)
3hp. FBM, Hit & Miss, complete and runs very good. Older restoration, skidded, correct repo muffler. HL crack at muffler port but does not leak when running. This is a very hard to come by engine and especially in this quality condition. Priced at $1995.00. and includes full Crate and shipping by FASTNEAL.(11 pic) NO BARTER OR TEARS.
3hp. FBM, H/M
3hp. FBM, HL crack shown.
3hp. FBM, H/M, Metal Oiler, probably orig. Equipment
Tom Thumb, SN:V2405(1908), Butter Churn/Gear and Pulley, Coned Pulley on Flywheeel, correct repo. Trucks, muffler and Gas tank, Decent oiler, Good compression, Battery/Coil incuded,No c/b/w that I can determine, from a Small Collection, Priced at $2500. FOB Chapel Hill, NC (4 Pic) NO BARTER OR TEARS.
10" Flywheel Ideal, SN:24557, Original Gas tank(repaired) and cast Iron Struts that hold the Tank. Very Strong Compression, cranks easily and run well.Belt, Battery Box/Battery/Coil included . On 48" Skids, wired and ready to go. Faults:
no muffler, and crank cover has a chip in the lip and a h/l crack in the rear. Priced @ $1095.00, FOB, Chapel Hill, NC(5 Pic) NO BARTER OR TEARS.
10" Flywheel Ideal(original gas tank with original cast iron Struts.
10" Flywheel Ideal, Lunkenhiemer Carb.
10" Flywheel Ideal.
10" Flywheel Ideal
"THE ORIGINAL" by Ideal, restored, coned pulley, Fan/belt, correct Muffler, and skidded. NOTE: The Carb. on The Original was different than the later models.
Correct and original tag is attached to the skid foreground left, larger view follows. Priced at: $2300.FOB Chapel Hill, NC . NO BARTER OR TEARS.
1-3/4hp. Frost King,SN:26284, Good Mag., , Muffler, Pulley, Heavy duty Homemade cart. $1895.00, FOB Chapel Hill, NC, (5 Pic), , NO BARTER OR TEARS.
1-3/4hp. Frost King
1.5hp. Brownwall, skidded, excellent compression, battery/Coil included, missing correct Muffler & Shrowd(?), Priced at $2400. FOB Chapel Hill, NC NO BARTER OR TEARS.
(1910)1.5hp. Rawleigh, Restored, SN:22550, Good Trucks, Oak Battery Box, Battery/Coil Furnished, Nice Essex CB/VT Oiler, 6" Pulley, Priced at $2150.FOB Chapel Hill, NC(5 Pic) NO BARTER OR TEARS.
1-1/2hp. Choreboy(the first Model) with large Magneto, Engine is complete, with muffler, gas tank, belt, pulley, crankguard, decent oiler, fan & all grease cups, ready to work or show. No c/b/w that is known by me.Priced at $1995. and includes shipping by FASTENAL.(7 Pic) NO BARTER OR TEARS.
1-1/2hp. Gifford, Gearless Engine, on nice set of Trucks with oak skids, 1 braze(see picture 2 & 3) Little hard to come by in this condition, priced at $6600. FOB Chapel Hill, NC (9 Pic) NO BARTER OR TEARS.
10hp. IHC Engine original crank guard in excellent condition, Good repairs on spots you see in pic(s), very few dings if any, all paint you see is original and has the original 'crimp'. PRICED AT 175. AND INCLUDES S&H IN US, WILL SHIP OUTSIDE US, WRITE FOR RATES, NO BARTER OR TEARS.
10HP. VICTOR, CG
10HP. VICTOR CG
Orig. JD 'E' Muffler, excellent condition, priced at 72. and includes S&H in US.
JD 'E' Muffler (2pic)
JD Pulley, 3.5" Bolt pattern, 5" dia x 4.5" long, steel(not sheet metal) priced at 78. and includes S&H in US.(3 Pic)
embossed MONITOR gas tank, priced at 79.99 and includes S&H in US. (3 Pic).
Embossed Monitor Gas Tank
JD 'E; Pulley, orig. excellent condition, sheet metal includes bolts, priced at 70. and includes S&H in US, (3 Pic)
JD 'E' Pulley
JD 'E' Pulle
Large Blower & Motor: 50hp.3 phase Elec. Motor by Westinghouse, 3550rpms, blower housing is plate steel, primed and ready to work. Size appx.: 3' wide at widest point, 50" tall, 24" Dia. Fan. condition is excellent. This unit was used very little: was oversized for a boiler and kept blowing the flame out and was removed. A smaller unit was installed on the Boiler. Appx. weight including the motor is 2200#. Shipping arrangements: Best to pick up and unit is located in Reidsville, NC and can be loaded with forklift, OR I can deliver to Portland, Ind. at the Spring swap, May 2015 for a fee. Priced at $750.00, would consider trades for Hit/Miss Engine(s), Maytags or Oilers..
Hand Held Magnetic Tool, Excellent for small screws/bolts/nuts/etc. that get lost on the floor or work bench. Sweep the area with this tool and pick up, then pull the handle and it de-activates the magnetic force. Measures: 9.5 x 4.75 x 1.5", Priced at $75.00 includes shipping to your USPS address.(2 Pic) NO BARTER OR TEARS.
7" Bigelow KILLER Trap, very good condition, Price is $98.00 and includes shipping to your USA USPS address.NO Barter or Tears.
"JOCKEY' Button Hook, 5-1/2" Long, Excellent condition, these were used to 'button' the Old High Top Shoes, Steel shank, Body is Probably Celluloid, dates to Early '30's, $75.00, prepaid to any Zip Code in Lower 48 States (7 Pic)
'JOCKEY' BUTTON HOOK
Finished Pump X-Head for Pump Jacks, including U-bolts as shown to hold arms, $65.00 and includes postage to your USPS address. (3 Pic).
Finished Pump Jack X-head for JD/or/Dain Pump Jacks,
Finsihed JD/Dain Pump Jack X-head
Humphrey & Sons Green Bone Cutter. Nicely restored is this unusal Bone cutter, nice skeleton, Bone hopper has a wheel with rachet that depresses the bones as needed, note that this unit as pat'd in Canada also.( Pot is probably comparable to a #7 Mann's)Priced at $695. includes crating, shipping by Fastenal .(13 Pic)
H & Sons Green Bone Cutter
H. & Sons Green Bone Cutter
H. & Sons Green Bone Cutter, Embossed.
H. & Sons Green Bone cutter
Old Welding Cart in very good original condition. Priced at 125. (2 Pic) SHIPPED COLLECT BY FASTENAL. NO BARTER OR TEARS.
Old Welding cart in very good original condition.
T-Model Coils, Tested Hot, good points and Clips. Priced at $30. ea. plus postage.(USPS Priority rates apply)(ONE coil will fit in a small priority box at 5.95)
National Coil, tested hot, nice finger-jointed oak box, priced at 75. and includes S&H in US. (3 pic)
John Deere 'E' toy by ERTL, NOS, $75.00 and includes postage to your USPS address. (2 Pic)
John Deere 'E'
STEP RAILS: 3" CHROME, 51"-C/C BOLT PATTERN, EXCELLENT CONDITION: NOTE: 4 OTHER ITEMS ARE INCLUDED IN THIS PRICE OF 99. AND INCLUDES FREE DELIVER TO PORTLAND MAY SWAP...BED TOP AILS, 2 SETS OF FLOOR MATS AND 1 SET OF MUD FLAPS.
2" CHROME BED TOP RAILS, ONE AS A SMALL DENT(SEE PIC) 89" C/C BOLT PATTERN.
2" CHROME BED TOP RAILS SHOWING DENT.
ANOTHER SET OF FLOOR MATS.
IHC FAMOUS ENGINE ERTL TOY,Replica Special Edition, 1st in a Series (1992) NEW in Box,Highly detailed, quality die-cast metal, rotating flywheels, 1/8th scale,#615DA, MADE IN USA, Priced at $75.00 includes shipping to your USPS address (2 Pic)
Early 1900's Childs Toy, "THE SHOCKER", this one is HOT. To Play the game required two kids, one to hold in each hand a handle, the other turned the crank handle, Faster handle is turned the more 'juice' would go into the handles, the winner was the one that could hold on the longest. This one is has a maple base(4.5 x 3.5"), Flywheel is 2-1/8" in Dial, handles are repo., but the red wooden plugs on top are original, wire is old wire, but not original to the toy(The original wire will be enclosed when shipped). A highly collectible toy, that works, priced at $195.00 and includes shipping & insurance to your USPS address.(5 Pic)
The Shocker(the red wooden plugs are original)
IHC 7" Wrench, LOGO very strong, wrench in very good condition. (3 Pic) Priced @ $29.95, includes packing and prepaid postage to your USPS address. NO Barter or Tears.
ALL ORIGINAL FEED SACK DOLLY, Handles are 47" Long, 20-1/4" wide at top, to 12-1/2" at bottom, Metal U protudes 4-1/2", wheels are 6" Dia., wood is Maple. Excellent condition, Priced at $125.00, Includes shipping by Fastenal.(4 Pic) NO Barter or Tears
FEED SACK DOLLY
HAYES, #1 Cow Pea Attachment, complete in very good condition, $145.00 prepaid to your USPS address. (4 Pic)
Cow Pea attachment
Cow Pea Attachment
Original Crank Handle for 2hp.Domestic/Atlantic SS Engine, Excellent some 'tooling' remains on the wooden Handle, Shipped postpaid to your USPS address for $113.96.
(3 Pic) NO Barter or Tears.
Domestic Crank Handle
Re-cast pump-Jack connector, U drill holes. $55.00 (2 Pic)
Re-cast Pump-Jack connector.
ZD Crank Handle(Repo), priced at $29.99 & includes S&H in USA.
ZD Crank Hankle
Cart Handles(copied from Rock Island Cart) Priced at 29.99 and includes S&H in USA.
NOS Plug in Original Box, Box in very good condition, $26.50 ships prepaid to your USPS Zip Code(2 pic)
NOS Rentz Plug in Orig. Box in very good condition
48" BEAR Trap, Blacksmith made in very good condition; Price is $1500.00 and includes crating & Shipping.3 Pic) NO Barter or Tears.
48" BEAR Trap
Gilbarco Fuel Nozzle, aluminum, very nice shape, look to be complete. Priced at 79.95, shiping included to your USPS Address.(4 Pic)
Gilbarco Fuel Nozzle
Gilbaro Fuel Nozzle
Gilbaro Fuel Nozzlel
IHC, by ERTL, NOS, $67.50 PP L-48
IHC by ERTL, Orig. Box
IHC by ERTL, NOS, in Orig. Box, $75.00, PP L-48
IHC Titan, by ERTL, NOS, with Orig. Box, $75.00, PP L-48
IHC Titan by ERTL, Orig. Box
NOS, Mint in Box Hess Minature Truck, $37.50, Prepaid to any Zip Code in Lower 48 States(2 Pic )
NOS, Hess Minature Truck
STRIKE WATER ANYWHERE, complete Unit, works Great, Excellent Show Pc. or for The GrandKids, Pump has New washers and was Cast in Elizabeth City, NC, $299.00, No Barter or Tears.
STRIKE WATER ANYWHERE
Jacobsen Sideshaft Carb., 1/4" FM, probably fits small Sideshafts, $125.00, Postage paid to your USPS address, No Barter or Tears.
1/4" Brass Union(NOS), priced $10. plus S&H in USA, Need 6 or more caontact me. (2 Pic)
1/4" Brass Union
1/8" Brass Union(NOS) priced at $10. plus S&H in USA. Need 6 or more contact me. (2 Pic)
1.8" Brass Union
1/8" Brass Drain Cock(NOS) priced at $10. pluse S&H in USA, need 3 or more contact me.
1/4" Brass Draom Cock(NOS) priced a $10. plus S&H. Need 3 or more contact me.
1/8" & 1/4" Bibb Lever Drain cocks(NOS) priced at $10. each, plus S&H in USA. Need more than 3 ea contact me.
1/8" NPT, Bronze cut off, priced at $17.50 and includes S&H in USA. (2 pic)
HAYS cut off valve
8hp. Fairmont, complete , runs well, battery/coil furnished and is wired to knife switch, radiator look very good, appears to be all original equipment. Priced at 895. (6 Pic) NO BARTER OR TEARS.
1.5hp. WISCONNA, DUAL CARB.GAS OR KERO., Unmolested on Nice Oak Trucks. The Gas tanks are reproduction to scale, the Magneto is original to the Engine, has been repaired and polished, repro. Muffler, nice Check Ball/Vent tube Oiler, Some original Paint remaines, Very nice collectible Engine, Not Rare, But extremely hard to come by in this condition. $2999.00, FOB Chapel Hill, NC (9 Pic.)NO BARTER OR TEARS.
1.5hp. WISCONNA, gears are very good, notice the original Paint.
1.5hp. WISCONNA, GAS/KERO.
1.5hp. WISCONNA, GAS/KERO, Unmolested Engine.
1.5hp. WISCONNA, COVER IS RAISED TO SHOW ACCESS TO ROD/BEARING, COVER IS DOWN IN THE NEXT PICTURE.
1.5hp. WISCONNA, COVER DOWN AND LOCKED, NOTICE SOME ORIGINAL PAINT.
1.5HP. WISCONNA, Oiler/check ball/vent tube.
1.5hp. Wisconna, Web. Magneto, original to this Engine.
8hp. Fairmont, complete with all original equipment, includes, pulley, throttle & timer levers(embossed), Original Metal Battery Box with RR numbers clearly stamped on same, battery/coil furnished,Raditor(and is in excellent condition), Name embossed on front, good orig. name tag, embossed carb., cranks & runs well, Priced at $895. FOB Chapel Hill, NC (10 Pic) NO BARTER OR TEARS.
NOS, Brass Oiler, Large, 10" Tall x 3-1/2" dia , Glass Good, No ID, apparently never used, Wooden Knobs are Old and have been added, replacing the Kralastic ones. $175.00, PP to your USA Zip Code (5 Pic)
NOS Brass Oiler
#6 Michigan Swing Top Pump Oiler, Plated,Glass Good, few Wrench marks, over all condition, VERY GOOD, $275, PP in Lower 48 States(USA)(7 Pic)
#1-1/2 EMBLEM, by Lunkenheimer, both Glass good, check ball intact, 3/8" NPT, No wrench marks(the few scratches that exist are probably due to human handling), wooden handle in excellent condition, 7.5" OA, Oiler appears to be NOS, $250.00, Shipping & Insurance included, but ships only to Lower 48 States(USA)(5 Pic)
(#1)Rett Butler,Franklin Mint Doll(1987),$195.00, Plus Shipping.
Scarlett O'Ohara by the Franklin Mint(1985), $195.00, Plus shippng.
Melanie by The Franklin Mint(1986), $195.00, plus shipping.
Ashley Wilkes by The Franklin Mint (1988), $195.00, plus shipping.
Undressed Antique German Bisque head doll, A. W. special, 26", Jointed, $350.00, plus shipping.
Antique bisque head , Kid body, #3700 by Armand Marseille, chip in thumb & forefinger(see close up pictures), 16", $195.00, plus shipping(2 Pic)
16" composition Shoulder head by Atlantic Co. , Original Clothers, Excellent condition, $95.00, plus shipping.
Wayside Inn from the Currier and Ives collection, New, $35.00, plus shipping.
Antique Doll Faint Couch, has been recovered, Small, Very Nice, $95.00, plus shipping, (2 Pic)
Doll Faint Couch.
antique K&R, #126, 28", Head by Simon & Halbig,Dressed as a boy in Old clothes, Excellent conditon, $1200.00, Plus shipping.
Antique Baby Buggy, Original, Black sleigh Tyoe made by F. A. Whitney Carriage Co. repo, upholstery, Carriage in EXCELLENT CONDITION, Can dis-assemble and ship, Deliver, or U can pick up, zip code for shipping estimate, $295.00(10 Pic)
Bisque Head Doll by Herrich-Handwerck, Germany, Head by Simon & Halbig, New Human Hair wig, old clothers, ball jointed composition body, 30", $1100.00, plus shipping.