Routed seams with horizontal crown molding bit 3/32" deep on baffle and 1/16" deep on box seams. 1/16/10
Bottom of box
View from rear
Fist coat of auto body putty.
Second coat of auto body putty 1/16/10
First coat of finishing putty sanded. 1/17/10
Bottom of cabinet after first coat of finishing putty sanded. Corners still need work.
Second coat of finishing putty applied heavier on the corners.
Second coat of finishing putty sanded with 120 on palm sander
Bottom of cabinet with second coat of finishing putty sanded with 120. Still needs corners filled.
Close up of trench on 1/2" MDF. Trench 1/16" deep x 3/4" wide.
After touch up of corners ready for primer.
Bottom of cabinet after second coat of finishing putty and third coat on corners.
Three coats of primer sanded with 220 after second coat. 1/17/10
Close up of 3rd coat of primer sanded with 600.
Third coat sanded with 600. 1/18/10
baking moisture out with I Heater and infra red lamp. 1/19/10
Sanded with 400 on palm sander. 1/21/10
Sanded with 400 with palm sander. 1/21/10
Need to move the heat lamp back. 12" is to close!
