Step 1 *If the surface is too hot or very cold, the decal may not stick. If it is hot outside, it is best to put the decal on in the shade. Clean the area thoroughly. Measure and place the sticker in the desired location. Put a piece of masking tape on the sticker to hold it in place. Hint: For best results do not install the sticker in extreme heat or cold.
Step 2 Lift the sticker up and peel the white paper backing off the sticker. Be careful not to pull the masking tape off. Make sure Decal adheres to the clear transfer paper. If the decal sticks to the white backing paper, lay the decal back down and rub the surface of the transfer paper.
Step 3 Slowly lower the sticker and rub it in place with a credit card or similar item.
Try to rub down and make sure there are not wrinkles or bubbles in the decal.
Step 4 Slowly peel the clear cover off at an angle -back onto itself. Be very careful not to pull the sticker off the surface. If the sticker pulls away from the surface repeat step 3.
If you notice bubbles in the decal after application, use the head of a needle to pop the bubble and gently rub the area with the tip of your finger.
