"Otherwise referred to as my Korean Ferrari.
Enjoy."

"We've been pulling a few strawberries off this plant every day for the last couple months. I had no idea they continued to produce over such a long time frame."

"Here is one side completed. Note the buzzer mounted (with foam tape it came with) inside the headlight/dash assembly."

"The beauty of this setup is that you don't even need to cut the wires to attach the piezo buzzer wiring. Just slide the rubberized connector covers back and attach the wires to the spade lug (as shown). When you are done, you must slide the cover back over the connector to insulate both the connector and your new connection to the buzzer. Polarity is important, but incorrect polarity does no damage other than the piezo buzzer not working."

"Here is the other side of the headlight. You can see the piezo buzzers (white) inside the headlight/dash assembly. Here I'm about to install the screw for the other side of the headlight."

"One of the two screws you need to remove to get the headlight cover off."